The Load Bearing CompanyStructural & steel works0161 706 3593Free survey

Cheshire & North West structural & steel specialists

Structural alterations & steel beam installation

If it carries a load, it's our job. The Load Bearing Company handles load-bearing wall removal, steel beams and RSJs, knock-throughs, chimney breasts, structural brickwork and steel-framed buildings — engineered, approved and finished properly.

RSJs & wall removals

Propped, set on padstones, signed off.

Structural calculations arranged, Building Control sign-off where it is required, and the steel in by the end of the day — for homeowners, landlords, housing associations, the NHS and the builders who fit around us.

Finished properly

Props out. Two rooms made one. Signed off.

The steel is seated, the opening made good and the floor swept before we leave — and when the job is bigger than a beam, the same crew builds canopies, covered yards and full steel-framed units, groundworks to cladding.
  • Engineer’s calculations arranged
  • Building control sign-off where required
  • Shelters & steel units supplied and built
  • Free, honest surveys
What we do

Structural work, done properly

The Load Bearing Company is a structural alterations and steel contractor based in Manchester, serving Cheshire, Greater Manchester, Merseyside, Lancashire and Cumbria: the whole North West. We handle load-bearing wall removal, steel beam and RSJ installation, knock-throughs, chimney breast removal, lintel replacement, structural brickwork, drylining and plastering, joinery, steel shelters and steel-framed buildings — for homeowners, landlords, housing associations, the NHS, builders, developers and commercial clients.

How it works

From first photo to completion certificate

  1. Free survey

    Send photos or plans, or we visit. We check what the wall carries, access for the steel and anything in the way.

  2. Engineer's design

    A structural engineer specifies the beam, padstones and any columns. We arrange it, or work to your existing calculations.

  3. Approvals

    Building Regulations application to the council or a registered building control approver, plus party wall notices where needed.

  4. Installation

    Props and needles in first, masonry out, steel in on padstones, packed tight. The house is supported at every stage.

  5. Sign-off

    Building control inspect the bearings, the steel is fire-protected and the opening is left ready for plaster.

Recent work

Built by us, standing in the weather

Wall removals, commercial demolition, new-build units, secure compounds and warehouse extensions — all our own jobs, built by our own team.

Projects

Jobs we have finished, start to sign-off

Real work with the real photos: what each job needed, how we supported the structure and what it was like at the end.

Recent contracts

Recent jobs by location and contract value, so you can see the size of work we take on.

  • Brooklands Road — Steel install — £17,500
  • The Brambles, Northwich — £11,900
  • Dane Bank Road, Lymm — £11,250
  • London Road, Stretton — £5,600
  • Moor Park Way, Northwich — £5,000
  • Moss Lane, Timperley — £4,500
  • Bow Lane, Bowdon — £3,780

All projects and recent contracts →

Where we work

Covering the whole of North West England

Cheshire and Greater Manchester are our heartland — and we take on steel and structural work right across North West England, from Merseyside and Manchester to Lancashire and Cumbria. 42 towns and cities, each with its own page.

Sale

Greater Manchester

Bury

Greater Manchester

See all areas across the North West →

Straight answers

Advice before you spend a penny

Costs, building regs, party walls — the guides below answer the questions we get asked every week.

Common questions

Which areas do you cover?

All of Cheshire and the surrounding North West — Knutsford, Wilmslow, Macclesfield, Altrincham, Sale, Stockport, Warrington, Northwich, Chester, Crewe and everywhere in between.

Do you arrange the structural engineer and building control?

Yes. We can arrange the structural calculations and the Building Regulations application as part of the job, or work to your existing engineer's design.

How quickly can you do a survey?

We usually offer a survey within a few working days. Send photos or drawings with your enquiry and we can often give a budget price the same day.

Do you build steel shelters and units as well as doing structural alterations?

Yes. Alongside RSJ installs and wall removals we supply and build steel shelters, canopies, covered yards and steel-framed units — groundworks, galvanised frame, cladding and doors, start to finish.

Do you work for builders as well as homeowners?

Yes — a large part of our work is fit-only steel installation for builders, kitchen fitters and loft conversion companies across the North West.

Tell us about your wall

Send a couple of photos or your engineer's drawings and we'll come back the same working day with honest advice and a price.